Touch Screen FFC Cable connects touch panels with controller boards in compact electronic devices. Cable dimensions, pitch, pin count, contact configuration and material options can be customized to match the target interface and installation space.
Technical Specifications
|
Parameter |
Specification |
|
Product Type |
Flexible Flat Cable (FFC) |
|
Pitch |
0.3 / 0.5 / 0.8 / 1.0 mm; custom pitches available |
|
Pin Count |
4–100+ pins |
|
Conductor |
Copper / Tin-plated copper |
|
Insulation |
PET / Polyimide (PI) film |
|
Contact Type & Direction |
Same-side / Opposite-side; Up / Down contact |
|
Contact Plating |
Gold-plated / Tin-plated |
|
Cable Structure |
Single-sided / Double-sided contact |
|
Operating Temperature |
Customized according to application requirements |
Cable Construction & Materials
Copper Conductors
Flat copper conductors form the electrical paths, with conductor width and count defined by the cable specification.
PET or Polyimide Insulation
PET and Polyimide (PI) films are available, with material selected according to the required temperature range and cable construction.
Contact Structure
Single- or double-sided contact structures are available for different connector configurations.
Contact Plating
Gold or tin plating can be specified for the exposed contact area according to connector requirements.
Touch Screen Interface Matching
Pin & Pitch Matching
Pin count and pitch are matched to the touch panel and controller-side connector for correct electrical alignment.
Contact Orientation
Up/down and same-side/opposite-side configurations are selected according to the connector entry direction and mating position.
Connector Verification
Connector type, contact position and mating orientation can be confirmed from drawings, samples or assembly references before production.
Routing & Installation
Cable length and contact position are defined according to the routing path and installation space between the touch panel and controller board.
Custom Development & Sampling
Drawing-Based Development
Engineering drawings can define pitch, pin count, cable length, contact orientation, dimensions and other production requirements for customized FFC development.
Sample-Based Development
An existing Touch Screen FFC sample can be used as the reference when the original drawing or complete technical specification is unavailable.
Prototype Verification
Samples can be produced before bulk orders to verify cable dimensions, contact configuration and connector fit with the target assembly.
Production Transfer
After sample approval, the confirmed drawing and configuration are transferred to batch production to maintain the approved structure across repeat orders.
Quality Inspection & Testing
Dimensional Inspection
Pitch, pin count, cable length, contact dimensions and position are checked against the approved drawing.
Electrical Testing
100% testing covers continuity, short circuit, conductor resistance and insulation resistance.
Contact Inspection
Contact direction, exposed area, position and plating condition are checked for connector conformity.
Batch & Final Inspection
Approved samples and drawings guide production. Finished cables are checked for configuration, dimensions and appearance before shipment, with batch records maintained.
Applications
Industrial HMI
Internal touch-panel connections between display modules and controller boards in HMI panels and CNC control interfaces.
Medical Touch Interfaces
FFC connections between touch panels and controller boards where compact routing and defined contact orientation are required.
POS & Interactive Terminals
Internal touch-interface wiring where limited enclosure space requires a flat, defined-length cable assembly.
Automotive Displays
Touch-panel connections in vehicle displays and instrument interfaces with specified pitch, contact orientation and cable routing.
Consumer Touch Devices
Internal connections in tablets, smart control panels and compact electronic devices requiring customized FFC dimensions.
FAQ

