Industrial Display FFC Cable is a flat internal interconnect for industrial display assemblies, linking LCD or touch display modules with controller and interface boards. Cable geometry, contact configuration and construction can be specified to match the display interface and internal installation requirements.
Technical Specifications
|
Specification |
Details |
|
Product Type |
Industrial Display Flexible Flat Cable (FFC) |
|
Pitch |
0.3 / 0.5 / 0.8 / 1.0 mm |
|
Pin Count |
4–100+ pins |
|
Conductor |
High-purity copper / tin-plated copper |
|
Insulation |
PET / flame-retardant options |
|
Cable Length |
Customized |
|
Contact Orientation |
Same-side / opposite-side |
|
Operating Temperature |
-20°C to +80°C; extended range available |
|
Reinforcement |
PET stiffener / custom support |
|
Shielding |
Available according to specified EMI requirements |
|
Compliance |
RoHS / REACH |
Display Interface Connection
Display-to-Board Connection
Connects LCD, touch display or display modules with controller and interface boards inside industrial equipment.
Connector & Contact Matching
Cable pitch, pin count, contact length and contact orientation can be matched to the specified FFC connector or reference cable.
Insertion & Interface Orientation
Contact-side orientation and insertion direction are confirmed against the connector position to prevent interface mismatch during assembly.
Industrial Display Mechanical Fit
Compact Internal Routing
The flat profile allows routing between the display module, PCB and enclosure where vertical clearance is limited.
Fold Position & Cable Exit
Cable length, contact orientation and exit direction can be matched to the available internal routing path.
Contact-End Reinforcement
PET or PI stiffeners can reinforce the contact area where repeated insertion or connector engagement requires additional support.
Signal & EMI Requirements
Signal / Ground Arrangement
Conductor and ground positions can follow the specified display interface layout where signal integrity or grounding requirements apply.
EMI Shielding
Aluminum foil, copper foil or specified shielding structures can be added for display interfaces exposed to EMI concerns.
Dielectric & Conductor Structure
Insulation thickness and conductor arrangement are controlled according to the specified cable construction and electrical requirements.
Custom Development & Sampling
Drawing or Sample-Based Development
Development can start from a CAD drawing, technical specification or existing cable sample.
Prototype & Fit Verification
Samples are produced after construction details are confirmed and checked for connector mating, contact orientation and installation fit.
Production Reference
The approved sample and drawing can be retained as the reference for pilot and repeat production.
Industrial Display Applications
HMI & Operator Panels
Internal display and touch-panel connections in PLC operator stations, machine-control terminals and industrial HMIs.
Industrial Monitors & Panel PCs
Display-module connections between LCD assemblies and controller boards in integrated industrial displays.
CNC & Machine Control Interfaces
Internal display connections in CNC panels and machine-control equipment where the display interface is integrated into the control enclosure.
FAQ