OLED Display Flexible Flat Cable is a customized FFC for signal connection in OLED display assemblies, providing defined cable configurations based on display interface, installation space, and project requirements. It supports drawing- or sample-based customization for prototype and production orders.
Technical Specifications
|
Parameter |
Specification |
|
Product Type |
OLED Display Flexible Flat Cable (FFC) |
|
Conductor Material |
High-purity annealed copper / Tin-plated copper |
|
Pitch |
0.3 mm / 0.5 mm / 0.8 mm / Customized |
|
Pin Count |
4 pins to 100+ pins |
|
Cable Dimensions |
Customized length, width, and thickness |
|
Insulation Material |
PET Film / PI (Polyimide) |
|
Contact Plating |
Gold-plated / Tin-plated |
|
Reinforcement |
PET stiffener / FR4 / Thermal tape |
|
Operating Temperature |
-30℃ to +80℃; extended options up to 105℃ |
|
Connector Compatibility |
ZIF / LIF connectors, standard or customized layouts |
|
Shielding |
Silver paste / Aluminum foil options |
|
Trace Alignment |
±0.05 mm |
|
Signal Configuration |
Controlled-impedance design available where specified |
OLED Interface & Contact Configuration
Connector Interface
ZIF and LIF connector configurations are available for OLED display assemblies, with terminal geometry matched to the specified connector interface.
Contact Configuration
Contact side, contact direction, exposed contact area, terminal dimensions, and contact positioning can be configured according to the OLED panel and mating connector requirements.
Routing & Installation
Cable routing, folding direction, terminal positioning, and cable dimensions can be coordinated with the available installation space and defined assembly path.
Cable Construction
Conductor & Insulation
High-purity annealed copper or tin-plated copper conductors can be combined with PET or PI insulation according to the specified cable construction and operating conditions.
Terminal Reinforcement
PET stiffeners, FR4 backing, or thermal tape can be added at specified terminal areas to support connector insertion and handling.
EMI Shielding
Silver paste or aluminum foil shielding can be incorporated where the cable configuration requires additional EMI control.
OLED Display Applications
Consumer & Portable Electronics
Mainboard-to-display interconnections in smartphones, tablets, laptops, and portable digital devices.
Wearable & Immersive Devices
Compact display assemblies in smartwatches, smart glasses, AR/VR headsets, and fitness monitoring devices.
Automotive Displays
Dashboard clusters, infotainment systems, and navigation displays requiring defined cable routing and display-side interface configurations. AEC-Q compatible material options are available for specified automotive configurations.
Industrial & Medical Displays
HMI panels, patient monitors, and diagnostic equipment incorporating OLED or other compact display modules.
Custom Development & Sampling
Drawing & Sample Development
Custom OLED FFCs can be developed from customer CAD drawings or existing cable samples, with pitch, pin count, dimensions, contact configuration, and connector requirements confirmed before production.
DFM Review
Design review can cover trace spacing, cable geometry, terminal structure, folding direction, reinforcement locations, and dimensional tolerances before production.
Prototype Sampling
Prototype samples are available for dimensional, connector-fit, contact configuration, and assembly verification. Prototype lead time is 3–7 working days.
Production Transfer
After sample configuration is confirmed, the approved design can be transferred to repeat production. Standard mass production lead time is 12–18 working days, depending on order volume and configuration.
Quality Inspection & Testing
Material Inspection
Copper conductors, insulation films, and specified production materials are checked against the approved material requirements.
Trace & Dimensional Inspection
AOI and dimensional inspection cover trace width, spacing, conductor alignment, cable dimensions, and specified terminal geometry.
Contact Inspection
Contact plating, exposed contact area, contact orientation, and terminal positioning are checked against the approved configuration.
Electrical Testing
100% testing covers continuity, shorts, and insulation resistance before shipment.
Final Inspection
Final inspection verifies cable dimensions, visual appearance, configuration, and packaging condition before release.
Certificate & Compliance
ISO 9001
Production is managed under an ISO 9001 quality management system.
RoHS & REACH
RoHS- and REACH-compliant material configurations are available for projects requiring restricted-substance compliance.
UL Material Options
UL-approved material options are available for specified cable constructions, subject to the selected material and configuration.
Automotive Material Options
AEC-Q compatible material options are available for specified automotive display configurations.
FAQ