Automotive Infotainment System Flexible Flat Cable is a flat cable for internal connections in vehicle infotainment systems, including displays, touch interfaces, head units and multimedia modules. It uses high-purity copper conductors with PET or Polyimide insulation and supports customized cable configurations.
Technical Specifications
|
Parameter |
Specification |
|
Product Name |
Automotive Infotainment System Flexible Flat Cable |
|
Conductor |
High-Purity Copper |
|
Pitch |
0.3 / 0.5 / 0.8 / 1.0 mm |
|
Insulation Material |
PET / Polyimide (PI) |
|
Operating Temperature |
-40°C to +105°C |
|
Extended Temperature |
Up to +125°C |
|
Conductor Count |
Customized |
|
Cable Length |
Customized |
|
Cable Width |
Customized |
|
Contact Configuration |
Same-Side / Opposite-Side / Top-Contact / Bottom-Contact |
|
Material Options |
PET / PI / Halogen-Free |
|
Quality Target |
Defect Rate <30 PPM |
|
Certifications |
IATF 16949, ISO 9001, RoHS, REACH, UL |
Infotainment Interface & Contact Configuration
Connector Matching
0.3, 0.5, 0.8 and 1.0 mm pitches with customizable conductor counts allow matching to specified FFC connectors and circuit layouts.
Contact Orientation
Same-side, opposite-side, top-contact and bottom-contact configurations match different connector entry directions and prevent contact-side mismatch during assembly.
Dimensional Fit
Cable length and width are customized to the PCB-to-connector distance and available routing space, reducing excess cable and installation interference.
Signal Transmission & Cable Construction
Copper Conductor
Copper conductors carry signal and power between infotainment boards and modules. Conductor count matches the required circuit layout.
PET / Polyimide Insulation
PET and Polyimide insulation are available for different temperature and material requirements; halogen-free options are available when specified.
High-Frequency Signal Transmission
The cable construction supports high-frequency data transmission with stable impedance requirements for infotainment display and multimedia connections.
Low-Profile Flat Construction
The flat cable profile supports routing between PCBs, displays and connectors where installation space is limited.
Custom Manufacturing & Replacement Supply
Drawing-Based Specification Review
Customer drawings can be reviewed against pitch, conductor count, dimensions and contact configuration before quotation and sampling.
Existing FFC Replacement
An existing cable sample can be used to reproduce the required configuration when the original part is discontinued or an alternative source is needed.
Sample Approval Before Production
Prototype samples allow buyers to verify dimensions, contact orientation and connector fit before committing to volume production.
Specification Retention for Repeat Orders
Approved drawings and sample specifications can be retained as the production reference, reducing repeated technical confirmation on subsequent orders.
Quality Control & Testing
Material & Dimensional Inspection
Conductor material, insulation film, conductor spacing, cable dimensions and forming accuracy are checked during production.
100% Electrical Testing
Every FFC is tested for continuity, resistance and high-voltage insulation before shipment.
Reliability Testing
Thermal shock, high-temperature aging and dynamic bending tests evaluate electrical and mechanical performance under temperature changes and repeated flexing conditions.
Quality System & Defect Control
Production is managed under IATF 16949 and ISO 9001 quality systems, with a defect-rate target below 30 PPM. RoHS, REACH and UL compliance requirements can be supported when specified.
FAQ