Medical Equipment Flexible Flat Cable is a flat internal connection cable for medical electronics, with copper conductors, PET or Polyimide insulation, configurable pitch, conductor count, length and contact orientation for PCB, display, sensor and control module connections.
Technical Specifications
|
Parameter |
Specification |
|
Product Type |
Medical Equipment Flexible Flat Cable |
|
Conductor Material |
Copper / Tin-Plated Copper |
|
Insulation Material |
PET / Polyimide (PI) |
|
Pitch |
0.3 mm / 0.5 mm / 1.0 mm |
|
Cable Length |
Customized |
|
Conductor / Pin Count |
Customized |
|
Contact Type |
Same Side / Opposite Side |
|
Operating Temperature |
-40°C to +105°C, customizable |
|
Connector Compatibility |
ZIF / LIF / Custom |
|
Quality Compliance |
ISO 9001, RoHS, REACH |
Cable Construction & Connector Configuration
Conductor & Insulation
Parallel copper or tin-plated copper conductors are arranged at a defined pitch and laminated with PET or Polyimide (PI) insulation.
Pitch & Conductor Count
0.3 mm, 0.5 mm and 1.0 mm pitch options are available, with conductor count configurable to the required connector interface.
Contact Configuration
Same-side or opposite-side contacts can be specified, with contact dimensions configured to match the mating connector and cable entry direction.
Connector Compatibility
ZIF, LIF and custom connector interfaces can be supported by coordinating pitch, conductor count, contact orientation and cable length with the equipment layout.
Sample & Drawing-Based Configuration
An existing FFC sample, technical drawing or connector specification can be used for configuration review. Samples can be produced for fit and connection verification before volume production.
EMI / Signal & Environmental Options
EMI-Sensitive Signal Routing
For medical equipment with sensor, display or control signals routed close to other electronic circuits, cable configuration can be reviewed according to the required signal path and equipment layout.
Shielded FFC Option
Shielded construction can be specified for applications where the cable routing requires additional electromagnetic interference control.
Temperature-Dependent Material Selection
PET and Polyimide (PI) insulation provide different material options for equipment with different temperature requirements. The stated operating range is -40°C to +105°C.
Halogen-Free Construction
Halogen-free material options are available for equipment specifications that restrict halogen-containing materials in internal cable assemblies.
Medical Equipment Applications
Medical Imaging & Monitoring Equipment
Ultrasound, imaging systems, ECG and patient monitoring equipment requiring internal PCB, display or sensor connections.
Laboratory & Diagnostic Equipment
Blood analyzers, biochemical analyzers and automated diagnostic instruments.
Medical Displays & Control Interfaces
Medical LCD displays, touch panels and control interfaces connecting display modules with control boards.
Quality Control
Material & Dimensional Inspection
Copper conductors and insulation films are checked before production, followed by in-process control of conductor alignment, lamination and cable dimensions against the specified construction.
Electrical Testing
Continuity, conductor resistance and insulation performance are tested during production, with 100% electrical inspection applied to the specified electrical checks.
Final Inspection
Finished FFCs are checked for conductor/contact alignment, surface defects and packaging condition before shipment.
FAQ